Page 1 of 1

Fusion!

Posted: Mon Dec 14, 2015 11:53 pm
by Silavite
Despite the fact that this is being removed temporary due to bugs it has caused (burning through burn chamber floor, causing negative % gasses), what do y'all think of the new fusion thing?

Re: Fusion!

Posted: Tue Dec 15, 2015 3:28 pm
by CPTANT
I am not really sure what a good application for it would be. If used to spread destruction it will just melt through the floors and it seems rather hard to sustain in the turbine to produce power.

Re: Fusion!

Posted: Tue Dec 15, 2015 3:34 pm
by Anonmare
If it got fixed it could be good for making hot gases and power generation. Would be good if we could make TEGs so I can indulge my inner autist.

Re: Fusion!

Posted: Tue Dec 15, 2015 4:37 pm
by TheNightingale
Fusion is just a cheap tactic to make weak gases stronger.

Re: Fusion!

Posted: Sat Dec 19, 2015 2:07 pm
by killerx09
Made a fusion cannister that had a pressure of 2x10^13 kPA and a temperature of 1x10^11 Celsius, used it to kill the rampaging Alien Queen. Feels good man.

I still honestly don't know what non-traitor function Fusion is supposed to fulfil though.

Re: Fusion!

Posted: Sat Dec 19, 2015 4:59 pm
by DemonFiren
killerx09 wrote:Made a fusion cannister that had a pressure of 2x10^13 kPA and a temperature of 1x10^11 Celsius, used it to kill the rampaging Alien Queen. Feels good man.

I still honestly don't know what non-traitor function Fusion is supposed to fulfil though.
I'm an atmos god but I suck at toxins.
Please share your wisdom.

Re: Fusion!

Posted: Sat Dec 19, 2015 5:00 pm
by Zilenan91
Fusion occurs when plasma and Co2 get hot enough to fuse.

If you do plasmic fusion in the atmos room, it heats up all the outgoing air so much that it will kill the entire station once the super-hot air goes through the vents.

Re: Fusion!

Posted: Sat Dec 19, 2015 5:11 pm
by DemonFiren
I know how fusion occurs, but I can't for the life of me make the gas hot enough without instantly suiciding.

Re: Fusion!

Posted: Sat Dec 19, 2015 5:12 pm
by Zilenan91
It's like 300000 kelvin or some stupidly high shit. I'm not sure if it's even possible without having a plasma fire and max upgraded space heaters and gas heaters going on at the same time.

Re: Fusion!

Posted: Sat Dec 19, 2015 5:14 pm
by as334
At the moment fusions main non-antag function is in power generation, but as we expand more function onto the atmos system it'll be a pre-requisite for a lot of the higher energy reactions.

Re: Fusion!

Posted: Sat Dec 19, 2015 5:18 pm
by Jazaen
as334 wrote: higher energy reactions.
as334 wrote: higher
You really do want an atmos nuke to be a thing, don't you?

Re: Fusion!

Posted: Sat Dec 19, 2015 5:24 pm
by CPTANT
It just melts the floor away every time I try to use it for power.

Re: Fusion!

Posted: Sat Dec 19, 2015 5:40 pm
by killerx09
DemonFiren wrote:
killerx09 wrote:Made a fusion cannister that had a pressure of 2x10^13 kPA and a temperature of 1x10^11 Celsius, used it to kill the rampaging Alien Queen. Feels good man.

I still honestly don't know what non-traitor function Fusion is supposed to fulfil though.
I'm an atmos god but I suck at toxins.
Please share your wisdom.
Fill can at 9000 kPa with 70/30 plasma/oxygen mix
Heat to 100 Celsius
Unwrench from port.
Wait a good 5-10 minutes.
Tadaa.

Re: Fusion!

Posted: Sat Dec 19, 2015 5:49 pm
by ShadowDimentio
Yesterday I was shadowling in a traitor round and thralled a traitor atmos tech who was dragging a canister. He asked if he could burn medbay. I said sure.

Two minutes later he released his canister in the hall outside medbay and the heat it generated was so bad it ate through the floors within like a 10-10 area around it while the heat went through the fucking walls, killing everyone on that half of the station. I died, he died, everyone, even normally temperature immune robots died.

Not to mention that apparently before it was nerfed or something some powerful atmos wizards created a mix so cold it killed you through space suits.

As hilarious as this is, it's dumb. Please remove.

Re: Fusion!

Posted: Sat Dec 19, 2015 5:53 pm
by killerx09
ShadowDimentio wrote:Yesterday I was shadowling in a traitor round and thralled a traitor atmos tech who was dragging a canister. He asked if he could burn medbay. I said sure.

Two minutes later he released his canister in the hall outside medbay and the heat it generated was so bad it ate through the floors within like a 10-10 area around it while the heat went through the fucking walls, killing everyone on that half of the station. I died, he died, everyone, even normally temperature immune robots died.

Not to mention that apparently before it was nerfed or something some powerful atmos wizards created a mix so cold it killed you through space suits.

As hilarious as this is, it's dumb. Please remove.
Funnily enough, if you make the version that dosn't breach the floors the mix becomes even worse, because space vents out the superheated gas.

Re: Fusion!

Posted: Sat Dec 19, 2015 6:18 pm
by DemonFiren
killerx09 wrote:
DemonFiren wrote:
killerx09 wrote:Made a fusion cannister that had a pressure of 2x10^13 kPA and a temperature of 1x10^11 Celsius, used it to kill the rampaging Alien Queen. Feels good man.

I still honestly don't know what non-traitor function Fusion is supposed to fulfil though.
I'm an atmos god but I suck at toxins.
Please share your wisdom.
Fill can at 9000 kPa with 70/30 plasma/oxygen mix
Heat to 100 Celsius
Unwrench from port.
Wait a good 5-10 minutes.
Tadaa.
The old in-can heating trick, yes, I remember that one...ah, did it ever cross purity threshold and blow up in your face?
If not, you're a goddamn genius. Thanks, I've been fucking around with the mixing chamber and heat exchangers.

Re: Fusion!

Posted: Sat Dec 19, 2015 6:23 pm
by killerx09
DemonFiren wrote:
killerx09 wrote:
DemonFiren wrote:
killerx09 wrote:Made a fusion cannister that had a pressure of 2x10^13 kPA and a temperature of 1x10^11 Celsius, used it to kill the rampaging Alien Queen. Feels good man.

I still honestly don't know what non-traitor function Fusion is supposed to fulfil though.
I'm an atmos god but I suck at toxins.
Please share your wisdom.
Fill can at 9000 kPa with 70/30 plasma/oxygen mix
Heat to 100 Celsius
Unwrench from port.
Wait a good 5-10 minutes.
Tadaa.
The old in-can heating trick, yes, I remember that one...ah, did it ever cross purity threshold and blow up in your face?
If not, you're a goddamn genius. Thanks, I've been fucking around with the mixing chamber and heat exchangers.
Nah, I'm pretty sure the inside is made out of unobtainium. Not once did it blow up on me.
Also, if you don't want to make a floor breach, make sure all the plasma is gone in the cannister.

Re: Fusion!

Posted: Sat Dec 19, 2015 6:39 pm
by DemonFiren
I am in lust with you, amigo.

It's time to become Lizard Pete.

Re: Fusion!

Posted: Sun Dec 20, 2015 7:25 pm
by Takeguru
ShadowDimentio wrote:Not to mention that apparently before it was nerfed or something some powerful atmos wizards created a mix so cold it killed you through space suits.
It was so cold that if you died to it, your ghost suffered the slow down.

Re: Fusion!

Posted: Mon Dec 21, 2015 4:00 pm
by duncathan
ShadowDimentio wrote: As hilarious as this is, it's dumb. Please remove.
Not happening. We'll fix it though, don't worry.

Re: Fusion!

Posted: Mon Dec 21, 2015 4:10 pm
by Cik
it should melt walls

all it needs is to be harder to do imo, as it is it's supertrivial to both make the gas mix and let it simmer. the gestation time until it's as hot as the core of a star is also pretty low.

Re: Fusion!

Posted: Mon Dec 21, 2015 4:28 pm
by CPTANT
I have to say that I also find it peculiar that a cannister is able to withstand a fusion reaction taking place inside.

Re: Fusion!

Posted: Mon Dec 21, 2015 4:50 pm
by Cik
ye. it should probably require a chamber made out of R-walls or something.

the atmos system was obviously not made to handle such ridiculous temperatures. when a can of it is opened it should probably just vaporize all the flooring, walls, airlocks for like 20 tiles

obviously this is a bad idea because it's just way too easy to melt the entire station with zero effort but it breaks muh immersion a little bit when all it does is shatter windows (well, aside from the effect on people)

there should probably be an environment shield suit manufacturable by R&D that can handle the temperatures or something too, as even the atmos hardsuit doesn't help against the insane temperature spike of being anywhere near the canister when it breaks.

basically fusion needs more of a framework to help it be a feature that's for anything but a few laughs once or twice or to make an unfixable atmos loop for atmostraitors (something that really was pretty much already possible anyway..)

atmos really needs more powerful machines that can actually fix stuff like this, as it is once it's released anywhere or into the atmos system it's basically GGWP as i can't imagine the volume pumps cleaning that stuff out of the distro in less than a geological era.

Re: Fusion!

Posted: Tue Dec 22, 2015 1:58 am
by Luke Cox
Fusion should be a lot more destructive. It's cool, but I can't think of a lot of practical uses for it other than easy maxcap bombs and turbine burn mixes. I'd also like to see some kind of engine that revolves around it. After all, fusion is the holy grail of renewable energy research, and would instantly solve virtually every environmental problem we have.

Re: Fusion!

Posted: Tue Dec 22, 2015 5:36 pm
by duncathan
There are plans to add ways to build thermal exchange generators for atmos techs. Power supply from one of those puppies with fusion involved will be awesome.

Re: Fusion!

Posted: Wed Dec 30, 2015 1:57 pm
by metacide
Looks like a meme insta-death-or-close-to-it traitor addition that's pretty destructive and doesn't make much sense. Who coded this and how'd it get past maintainers? As amusing as a surprise release of 4.6 quadrillion Pa superheated gas from a canister is, it's pretty stupid.

Would be neat to see some engine using it one day, but that sounds like a long-off pipe dream. At least make it require super-heavy reinforced canisters and balance it properly in the meantime.

Re: Fusion!

Posted: Wed Dec 30, 2015 2:58 pm
by Grazyn
Please don't "fix" this by removing in-canister burning.

Re: Fusion!

Posted: Wed Dec 30, 2015 3:35 pm
by Aloraydrel
Anything that adds new stuff for atmos techs to play with is always good since there is only so much you can do

Re: Fusion!

Posted: Sun Jan 03, 2016 4:22 am
by PKPenguin321
Today the CE put so much pressure/temperature into the turbine with fusion that it stopped being able to generate power.
Fusion is pretty fucking silly.

Re: Fusion!

Posted: Mon Jan 04, 2016 1:04 am
by duncathan
Please use the issue tracker to report bugs so we can find them easier

Also so we can get those sweet cheribucks

Re: Fusion!

Posted: Mon Jan 04, 2016 1:27 am
by PKPenguin321
I would, but I'm not the one that understands how it works, the CE is. ¯\_(ツ)_/¯

Re: Fusion!

Posted: Mon Jan 04, 2016 3:49 pm
by killerx09
Made a fusion flamethrower that melted any floor tile it touched, and was a guranteed death if you touched it. Was fun, but I have no success trying to replicate it.

Re: Fusion!

Posted: Mon Jan 04, 2016 3:52 pm
by CPTANT
killerx09 wrote:Made a fusion flamethrower that melted any floor tile it touched, and was a guranteed death if you touched it. Was fun, but I have no success trying to replicate it.
easy to replicate, just fuse a cannister and heat exchange it with a plasma cannister, fill a flamethrower with the extremely hot pure plasma.

correction: this completely causes the flamethrower to bug out

Re: Fusion!

Posted: Mon Jan 04, 2016 6:19 pm
by onleavedontatme
Doesn't really seem to be worth having in the game in its current state.

At least we've had several weeks of gameplay without bombs though.

Re: Fusion!

Posted: Mon Jan 04, 2016 9:53 pm
by PKPenguin321
CPTANT wrote:
killerx09 wrote:Made a fusion flamethrower that melted any floor tile it touched, and was a guranteed death if you touched it. Was fun, but I have no success trying to replicate it.
easy to replicate, just fuse a cannister and heat exchange it with a plasma cannister, fill a flamethrower with the extremely hot pure plasma.

correction: this completely causes the flamethrower to bug out
holy christ, if you made a heat transfer loop with a fusion canister and handcuffed somebody and buckled them to the pipe, would they just die instantly?

Re: Fusion!

Posted: Mon Jan 04, 2016 10:04 pm
by CPTANT
PKPenguin321 wrote:
CPTANT wrote:
killerx09 wrote:Made a fusion flamethrower that melted any floor tile it touched, and was a guranteed death if you touched it. Was fun, but I have no success trying to replicate it.
easy to replicate, just fuse a cannister and heat exchange it with a plasma cannister, fill a flamethrower with the extremely hot pure plasma.

correction: this completely causes the flamethrower to bug out
holy christ, if you made a heat transfer loop with a fusion canister and handcuffed somebody and buckled them to the pipe, would they just die instantly?
The heat damage max seems to be pretty low. You even survive in temperatures of 10^10 for a while.


In other news: Now reactions take place in pipes basically every mix of oxygen and plasma above 100 degrees is going to fuse. this basically makes the pressure and temperature go to >10^10 pa and fucks up the pipe for the rest of the match because no pump can remove that amount of gas.

Re: Fusion!

Posted: Tue Jan 05, 2016 12:58 am
by Grazyn
I've never been able to fill a tank from a fusion canister, the insane pressure and heat bugs it out, and opening the valve does nothing. Even if there's no tank inside, gas won't leak out with the valve open.

Re: Fusion!

Posted: Tue Jan 05, 2016 1:29 am
by CPTANT
Lets face it, the only word that can be used to describe fusion is "broken".

It fucks up basically EVERY atmos function.

Re: Fusion!

Posted: Tue Jan 05, 2016 1:54 am
by CPTANT
Another fun fact:

Any CO2/Plasma mixture which has O2 present but in less than 10% will spontaneously fuse

Re: Fusion!

Posted: Tue Jan 05, 2016 11:46 am
by Actionb
CPTANT wrote: In other news: Now reactions take place in pipes basically every mix of oxygen and plasma above 100 degrees is going to fuse. this basically makes the pressure and temperature go to >10^10 pa and fucks up the pipe for the rest of the match because no pump can remove that amount of gas.
Weird that this has been readded. I remember burning in pipes having been removed. You could do some really crazy stuff with this even before fusion was a thing and honestly, I wasn't sad to see it go. Without the pipe magic you had to at least build/use some infrastructure to get any meaningful reaction going.

Re: Fusion!

Posted: Tue Jan 05, 2016 12:26 pm
by killerx09
There's a sweet spot where the temperature isn't high enough for fusion to occur and the flamethrower still fires, that was what i'm trying to replicate.

Re: Fusion!

Posted: Tue Jan 05, 2016 2:04 pm
by CPTANT
Just hooked a fusion cannister to the atmos system and burned the entire station to a crisp.

Set the vents to expel and just watched the beautiful pressure wave obliterate every window on the station plus 90% of the crew.


Kek.

Re: Fusion!

Posted: Tue Jan 05, 2016 2:16 pm
by Gun Hog
CPTANT wrote:Just hooked a fusion cannister to the atmos system and burned the entire station to a crisp.

Kek.
How do I do this as AI? I keep melting the mix tank by accident, and it purges all my gas.

Re: Fusion!

Posted: Tue Jan 05, 2016 2:18 pm
by CPTANT
Gun Hog wrote:
CPTANT wrote:Just hooked a fusion cannister to the atmos system and burned the entire station to a crisp.

Kek.
How do I do this as AI? I keep melting the mix tank by accident, and it purges all my gas.
I don't really think you can without a borg. But 1 engineering borg can do it extremely easy.

You can abuse the cold fusion bug and start a fusion reaction in the main atmos pipes though.