Page 1 of 1

Stop using the .357

Posted: Mon Jul 31, 2023 11:43 am
by Longestarmlonglaw
Literally just apply a wrench to the colt detective special, boom easy and free .357 without spending 14 fucking telecrystals.

Re: Stop using the .357

Posted: Mon Jul 31, 2023 12:26 pm
by kinnebian
Stop buying the airlock override.
Literally just get the captain's spare, boom. Easy and free.

Re: Stop using the .357

Posted: Mon Jul 31, 2023 1:29 pm
by Jacquerel
Stop buying the syndicate bomb, just go to science and mix up some gases. Same explosion but without the window where it can be disarmed.

Re: Stop using the .357

Posted: Mon Jul 31, 2023 2:26 pm
by Rhials
Stop buying the chameleon kit, just roll changeling instead

Re: Stop using the .357

Posted: Mon Jul 31, 2023 2:30 pm
by conrad
Stop buying the sleepy pen. Your PDA has a pen you moron.

Re: Stop using the .357

Posted: Mon Jul 31, 2023 2:37 pm
by TheLoLSwat
conrad wrote: Mon Jul 31, 2023 2:30 pm Stop buying the sleepy pen. Your PDA has a pen you moron.
God I love the sleepy pen it’s so useful

Re: Stop using the .357

Posted: Mon Jul 31, 2023 3:43 pm
by Kendrickorium
kinnebian wrote: Mon Jul 31, 2023 12:26 pm Stop buying the airlock override.
Literally just get the captain's spare, boom. Easy and free.
i will buy 6 of them

Re: Stop using the .357

Posted: Mon Jul 31, 2023 4:32 pm
by kinnebian
STOP

Re: Stop using the .357

Posted: Mon Jul 31, 2023 4:56 pm
by Not-Dorsidarf
doesnt the detective revolver have a chance to blow your hand off if you rechamber it to 357 if you dont reload after every shot

Re: Stop using the .357

Posted: Mon Jul 31, 2023 9:33 pm
by MooCow12
stop buying the syndicate tome

you can get yourself valided and rr`d much quicker with an edagger

Re: Stop using the .357

Posted: Mon Jul 31, 2023 11:19 pm
by nianjiilical
stop using uplink items, just beat the captain to death with a toolbox like god intended

Re: Stop using the .357

Posted: Mon Jul 31, 2023 11:22 pm
by Jonathan Gupta
stop using anything throw people into walls because its better then shoving and punching smh

Re: Stop using the .357

Posted: Mon Jul 31, 2023 11:26 pm
by Jacquerel
you actually dont even need the game client you can just imagine spacemen running around and beating each other with hammers entirely inside your own head

Re: Stop using the .357

Posted: Mon Jul 31, 2023 11:51 pm
by Jonathan Gupta
you know what stop imagining it, just FEEL IT in your SOUL

Re: Stop using the .357

Posted: Tue Aug 01, 2023 1:12 am
by MooCow12
stop destroying and rebuilding broken apcs I made it so you can replace the covers and repair them and i still see people do it!!!

Re: Stop using the .357

Posted: Tue Aug 01, 2023 1:31 am
by Jonathan Gupta
MooCow12 wrote: Tue Aug 01, 2023 1:12 am stop destroying and rebuilding broken apcs I made it so you can replace the covers and repair them and i still see people do it!!!
describe how in a forum post please

Re: Stop using the .357

Posted: Tue Aug 01, 2023 2:47 am
by Constellado
MooCow12 wrote: Tue Aug 01, 2023 1:12 am stop destroying and rebuilding broken apcs I made it so you can replace the covers and repair them and i still see people do it!!!
It works now? I thought all it did was made it so you can unwrench the front when its broken, but you still need to deconstruct and reconstruct it to be able to replace the charred board.(it complains the frame is too damaged) Do you just put a sheet of iron in it or something? Do I actually not need to deconstruct it fully?
If so, that will make it SO much easier.

How do?

Re: Stop using the .357

Posted: Tue Aug 01, 2023 5:33 am
by serxule
Image

Re: Stop using the .357

Posted: Tue Aug 01, 2023 7:18 am
by MooCow12
Constellado wrote: Tue Aug 01, 2023 2:47 am
MooCow12 wrote: Tue Aug 01, 2023 1:12 am stop destroying and rebuilding broken apcs I made it so you can replace the covers and repair them and i still see people do it!!!
It works now? I thought all it did was made it so you can unwrench the front when its broken, but you still need to deconstruct and reconstruct it to be able to replace the charred board.(it complains the frame is too damaged) Do you just put a sheet of iron in it or something? Do I actually not need to deconstruct it fully?
If so, that will make it SO much easier.

How do?
If cover is damaged but not broken you can welder it

if cover is broken you crowbar it off and replace it using a new apc frame then welder its health back up (because you literally just slapped a new cover on so any hit will just break it again)


the thing about the charred board is a red herring basically you either have a charred board that crumbles or its emagged/malf hacked and you get rid of it and it magically vanishes.

Nothing ever actually causes the apc board to be destroyed and it exists perfectly fine until the apc is fully deconstructed.

Re: Stop using the .357

Posted: Tue Aug 01, 2023 12:53 pm
by nianjiilical
MooCow12 wrote: Tue Aug 01, 2023 7:18 am
Constellado wrote: Tue Aug 01, 2023 2:47 am
MooCow12 wrote: Tue Aug 01, 2023 1:12 am stop destroying and rebuilding broken apcs I made it so you can replace the covers and repair them and i still see people do it!!!
It works now? I thought all it did was made it so you can unwrench the front when its broken, but you still need to deconstruct and reconstruct it to be able to replace the charred board.(it complains the frame is too damaged) Do you just put a sheet of iron in it or something? Do I actually not need to deconstruct it fully?
If so, that will make it SO much easier.

How do?
If cover is damaged but not broken you can welder it

if cover is broken you crowbar it off and replace it using a new apc frame then welder its health back up (because you literally just slapped a new cover on so any hit will just break it again)


the thing about the charred board is a red herring basically you either have a charred board that crumbles or its emagged/malf hacked and you get rid of it and it magically vanishes.

Nothing ever actually causes the apc board to be destroyed and it exists perfectly fine until the apc is fully deconstructed.
im going to be real with you chief after playing this game since 2019 i simply accepted that apcs work on black magic and any time i see a broken one i just move to a different room instead of trying to parse the eldritch knowledge involved in fixing the fucking things

Re: Stop using the .357

Posted: Tue Aug 01, 2023 1:11 pm
by conrad
nianjiilical wrote: Tue Aug 01, 2023 12:53 pm
MooCow12 wrote: Tue Aug 01, 2023 7:18 am
Constellado wrote: Tue Aug 01, 2023 2:47 am
MooCow12 wrote: Tue Aug 01, 2023 1:12 am stop destroying and rebuilding broken apcs I made it so you can replace the covers and repair them and i still see people do it!!!
It works now? I thought all it did was made it so you can unwrench the front when its broken, but you still need to deconstruct and reconstruct it to be able to replace the charred board.(it complains the frame is too damaged) Do you just put a sheet of iron in it or something? Do I actually not need to deconstruct it fully?
If so, that will make it SO much easier.

How do?
If cover is damaged but not broken you can welder it

if cover is broken you crowbar it off and replace it using a new apc frame then welder its health back up (because you literally just slapped a new cover on so any hit will just break it again)


the thing about the charred board is a red herring basically you either have a charred board that crumbles or its emagged/malf hacked and you get rid of it and it magically vanishes.

Nothing ever actually causes the apc board to be destroyed and it exists perfectly fine until the apc is fully deconstructed.
im going to be real with you chief after playing this game since 2019 i simply accepted that apcs work on black magic and any time i see a broken one i just move to a different room instead of trying to parse the eldritch knowledge involved in fixing the fucking things
Well that's too bad 'cos if I see a broken APC I'm gonna ahelp how to fix it and you better not link me the fucking wiki.

Re: Stop using the .357

Posted: Tue Aug 01, 2023 1:25 pm
by NecromancerAnne
Stop arresting people with the baton. Just rig the cell and hit them once to make sure they never cause problems in the round again.

Re: Stop using the .357

Posted: Tue Aug 01, 2023 11:53 pm
by Constellado
MooCow12 wrote: Tue Aug 01, 2023 7:18 am
Constellado wrote: Tue Aug 01, 2023 2:47 am
MooCow12 wrote: Tue Aug 01, 2023 1:12 am stop destroying and rebuilding broken apcs I made it so you can replace the covers and repair them and i still see people do it!!!
It works now? I thought all it did was made it so you can unwrench the front when its broken, but you still need to deconstruct and reconstruct it to be able to replace the charred board.(it complains the frame is too damaged) Do you just put a sheet of iron in it or something? Do I actually not need to deconstruct it fully?
If so, that will make it SO much easier.

How do?
If cover is damaged but not broken you can welder it

if cover is broken you crowbar it off and replace it using a new apc frame then welder its health back up (because you literally just slapped a new cover on so any hit will just break it again)


the thing about the charred board is a red herring basically you either have a charred board that crumbles or its emagged/malf hacked and you get rid of it and it magically vanishes.

Nothing ever actually causes the apc board to be destroyed and it exists perfectly fine until the apc is fully deconstructed.
Wait, so you make a new APC frame and just slap it on? And it fixes it? Yeah the chances of a player figuring that out ingame is close to zero! Glad I know about it now.

Also interesting titbit about the board.

Re: Stop using the .357

Posted: Wed Aug 02, 2023 12:48 am
by MooCow12
Constellado wrote: Tue Aug 01, 2023 11:53 pm

Wait, so you make a new APC frame and just slap it on? And it fixes it? Yeah the chances of a player figuring that out ingame is close to zero! Glad I know about it now.

Also interesting titbit about the board.
I recall adding examine text to it.