|
|
(3 intermediate revisions by the same user not shown) |
Line 263: |
Line 263: |
| |usedfor = Used for holding and transporting gases like [[Oxygen]], [[Plasma|Plasma gas]] and the like | | |usedfor = Used for holding and transporting gases like [[Oxygen]], [[Plasma|Plasma gas]] and the like |
| |strategy = Place around hallways, wait for [[Assistant|Assistants]] to open them for no reason | | |strategy = Place around hallways, wait for [[Assistant|Assistants]] to open them for no reason |
− | |description = When new and before use, or when almost fully emptied, a label can be selected from its interface. This will change its color to indicate what it may contain (or fooling people into thinking it contains [[Oxygen]] and not [[Plasma]]) | + | |description = When new and before use, or when almost fully emptied, a label can be selected from its interface. This will change its color to indicate what it may contain (or fooling people into thinking it contains [[Oxygen]] and not [[Plasma]]). |
| | | |
− | Can be made with 10 sheets of [[Metal]].
| + | Canister frames be made with [[Metal]]. They must then be upgraded to a chosen tier with other materials. Their maximum temperature, pressure resistances and maximum output pressure (for filling tanks) depend on tier. |
| + | *Tier 1: 5000 K and 50000 kPa, 1000 kPa max output (frame -> 5 metal -> screwdriver) |
| + | *Tier 2: 500000 K and 5e6 kPa, 2000 kPa max output (frame -> 5 metal -> 5 plasteel -> screwdriver) |
| + | *Tier 3: 1e12 K and 1e14 kPa, 3000 kPa max output (frame -> 5 metal -> 5 plasteel -> 1 bluespace crystal -> screwdriver) |
| + | |
| + | Canisters containing 300 kPa or less can be disassembled with a welding tool. |
| }} | | }} |
| | | |
Line 277: |
Line 282: |
| |usedfor = Filling a room with air. Can also be use to suck the air out of a room | | |usedfor = Filling a room with air. Can also be use to suck the air out of a room |
| |strategy = Set the pump direction to out, set your target pressure (most likely 101.3 kPa), turn it on, and it re-pressurizes a room until its air runs out | | |strategy = Set the pump direction to out, set your target pressure (most likely 101.3 kPa), turn it on, and it re-pressurizes a room until its air runs out |
− | |description = Out with the good air. It both sucks and blows. Be sure to connect it to the blue ports outside [[Atmospherics]] to fill it up with delicious air mix beforehand. | + | |description = Out with the good air. It both sucks and blows. Be sure to connect it to the blue ports outside [[Atmospherics]] to fill it up with delicious air mix beforehand. Breaks over 5000 K or 50000 kPa. |
| }} | | }} |
| | | |
Line 289: |
Line 294: |
| |usedfor = Cleaning the air from [[Plasma|Plasma gas]] and other unwanted gasses. Also used for emptying [[Plasma Tank]]s and [[Oxygen Tank]]s | | |usedfor = Cleaning the air from [[Plasma|Plasma gas]] and other unwanted gasses. Also used for emptying [[Plasma Tank]]s and [[Oxygen Tank]]s |
| |strategy = Pull it to the leak, put it on maximum power and turn it on | | |strategy = Pull it to the leak, put it on maximum power and turn it on |
− | |description = In with the bad air. Flip it on to filter out the bad gases very slowly. Connect it to the red ports outside [[Atmospherics]] to empty it out once it's full. Make sure you also re-fill the area with clean oxygen. | + | |description = In with the bad air. Flip it on to filter out the bad gases very slowly. Connect it to the red ports outside [[Atmospherics]] to empty it out once it's full. Make sure you also re-fill the area with clean oxygen. Breaks over 5000 K or 50000 kPa. |
| }} | | }} |
| | | |
Line 312: |
Line 317: |
| |foundin = [[Medbay]], [[Atmospherics]] | | |foundin = [[Medbay]], [[Atmospherics]] |
| |usedfor = Cooling/heating gasses in pipes, [[Medical_items#Cryogenics_Chamber_.26_Freezer|Cryogenics Chamber]] | | |usedfor = Cooling/heating gasses in pipes, [[Medical_items#Cryogenics_Chamber_.26_Freezer|Cryogenics Chamber]] |
− | |strategy = Make a [[Canister]] with chilled [[Oxygen]], give it to [[R&D]] | + | |strategy = Chill/heat gases |
| |description = Will cool/heat any gasses in the connected pipes. Can be used to cool down gasses that come in through waste after a fire. | | |description = Will cool/heat any gasses in the connected pipes. Can be used to cool down gasses that come in through waste after a fire. |
| | | |