Difference between revisions of "Guide to toxins"

From /tg/station 13 Wiki
Jump to: navigation, search
m (Clarity on the principles subsection)
(Redoes the Research Bomb section almost entirely. General page updates all around.)
Line 1: Line 1:
'''Toxins''' is a section of the Research and Development section of the station. There was a time when being in this place was basically a dead giveaway that you were a [[Traitor|bad guy]] but with the advent of [[Research]] bombs, this is no longer the case.* Instead, being a robust bomb-maker will get you praise and laudation as the crew realises you used all the bombmix to get up to 50.000 Research points rather than using it to [[Fun|turn the Station into a crater-ridden deathtrap.]]
+
'''Toxins''' is a section of the Research and Development section of the station. There was a time when being in this place was basically a dead giveaway that you were a [[Traitor|bad guy]] but with the advent of [[Research]] bombs, this is no longer the case.* Instead, being a robust bomb-maker will get you praise and laudation as the crew realizes you used all the bombmix to complete difficult research experiments and get up to 50,000 Research Budget credits rather than using it to [[Fun|turn the Station into a crater-ridden deathtrap!]] Hooray Science!
  
''*Make note that past the first research bomb the remaining bomb mix's only application is for nefarious purposes (or very inefficient but fun lavaland mining).''
+
''*Make note that past the first research bomb the remaining bomb mix's only applications are for refining raw anomaly cores via the [[#Implosion Compressor|Implosion Compressor]], or for more nefarious purposes (or very inefficient but fun lavaland mining).''
 
+
''The [[#Implosion Compressor|Implosion Compressor]] is another use for toxins, but using a full research bomb's mix on it would be wasteful, since it requires very small yields.''
+
 
<br>
 
<br>
 
<br>
 
<br>
 +
[[File:Toxins meta roundstart.png|300px|thumb|alt=Toxins|Toxins is located within the [[Research Division]] and is the home of bomb construction with the lab on the left, a passageway in the middle and the observation room on the right.]]
  
=Acquiring your bomb mix=
+
=[[File:Canister.png]] Acquiring A Research Bomb Mix=
[[File:Toxins meta roundstart.png|300px|thumb|alt=Toxins|Toxins is located within the [[Research Division]] and is the home of bomb construction with the lab on the left, a passageway in the middle and the observation room on the right.]]
+
''Latest Revision by [[User:PotatoMasher|PotatoMasher]]. Send any questions or comments my way.''
  
'''TL;DR: Watch [https://www.youtube.com/watch?v=pWtBTXREN8E this video] for the concise guide to toxins.'''
+
The primary goal of Toxins is to create a gas mixture that when combined will cause a massive explosion, large enough for the mixture formula to complete required experiments for research (as well as being valuable enough to sell off for profit, because we here at SS13 LOVE money). A number of technologies involving weaponry and explosives require completed Toxins Experiments to be able to research them. You can also earn a max amount of 50,000 credits towards the Research Department's budget, allowing the [[Research Director]] to purchase plenty of goods and extra raw anomaly cores from cargo.
  
 +
This section covers a single method to obtain a "50k" Research Bomb, which should grant that sweet sweet credit boost towards the budget as well as complete every required toxins experiment. There's more than one way to go about making a bomb though, so feel free to experiment if you're confident enough you won't blow up the entire department.
  
Already know how to make a bomb and just want the mix? Skip to the next section. New to bomb making? Read on.
+
=== Introduction ===
  
 
A regular bomb consists of two tanks attached to a [[Tank_Transfer_Valve|tank transfer valve.]] For a finished research bomb, one of those tanks will be filled with a mix of supercooled Oxygen and Tritium (33% Tritium and 66% Oxygen at about 43K temperature), providing the boom, and another tank filled with superheated Plasma (8000-32000K temperature), providing the energy.
 
A regular bomb consists of two tanks attached to a [[Tank_Transfer_Valve|tank transfer valve.]] For a finished research bomb, one of those tanks will be filled with a mix of supercooled Oxygen and Tritium (33% Tritium and 66% Oxygen at about 43K temperature), providing the boom, and another tank filled with superheated Plasma (8000-32000K temperature), providing the energy.
[[Guide_to_Atmospherics#Tritium|Tritium]] happens when [[Plasma]] is burnt in a very [[Oxygen]]-rich environment, generally about 3%-97%. In total, we'll burn in the Toxins lab's heating chamber three of the four Oxygen canisters that we start with and then slowly trickle in Plasma and ignite it. Hot gases take up a lot of place, so we're going to want to cool the Tritium right after creating it to reduce its volume and help us store as much as possible. '''(Also if you don't the containers will melt and you'll be [[#Don't be this guy|this guy]].)''' All the [[tools]] you need for that are in this room: [[Wrench]], [[Screwdriver]], [[Crowbar]], [[Analyzer]] and [[RPD]].
+
[[Guide_to_Atmospherics#Tritium|Tritium]] happens when [[Plasma]] is burnt in a very [[Oxygen]]-rich environment, generally about 3%-97%. In total, we'll burn in the Toxins lab's heating chamber three of the four Oxygen canisters that we start with and then slowly trickle in Plasma and ignite it. Hot gases take up a lot of place, so we're going to want to cool the Tritium right after creating it to reduce its volume and help us store as much as possible. '''(Also if you don't the containers will probably melt and you'll be [[#Don't be this guy|this guy]].)''' All the [[tools]] you need for that are in this room: [[Wrench]], [[Screwdriver]], [[Crowbar]], [[Analyzer]] and [[RPD]]. When piping with the RPD, remember to avoid using grey pipes when possible, as they auto connect with every single other colored pipe. Plus, color coding helps with visual clarity and organization. [[File:Toxins setup.png|350px|thumb|Your setup should look similar to this when you are done setting up, varying by map of course.]]
  
The first thing you should do in the Toxins Lab is open the interior airlock of the heating chamber, go inside the [[airlock]] and set the lower pump to 4500 kPa and re-pipe the output piping at the top. After you max out the lower pump, you can start wrenching Oxygen canisters to the bottom connector, open the valve and just let it flood in while you work. You'll want to replace the top valve with a pump (pressure or volume both work, but volume has a higher throughput and is generally used in custom pipings) and the straight pipe under the gas meter with a manifold allowing for a connection up. Replace the pressure pump you start with with a straight pipe. Regularly keep checking the Oxygen Canister to see if it's empty and replace it if it is until you have three total in. At some point you're also going to want to print some plasteel and build a tier 2 [[Atmospherics_items#Canister|canister]].
+
=== Initial Piping ===
  
To reach our target temperature of about 43.15 Kelvin, we're going to need to upgrade our Heaters/Freezers with [[High-Power_Micro-Laser|Tier 2 Lasers]], which should by now be available from the Science Protolathe in [[Research and Development]]. If not, consider liberal application of a Toolbox to your fellow scientists heads, and/or research Industrial Engineering yourself and print 4 of them. You can also use a RPED to install them quicker. [[File:Toxins_edited.png|200px|thumb|Example setup with triple scrubbers and freezer.]]
+
For this set up, we are going to add an extra scrubber and canister port to extract the super hot plasma needed while the mix is burning.  
  
Next, head back to your den and [[Guide_to_construction#Machines|dismantle]] the [[Freezer|Freezer and Heater]], hit the Heater board with a screwdriver to turn it into a Freezer board, move the machine frame and re-build it so it connects to your manifold under the gas meter. Re-build the other freezer, too. In both cases, use your new lasers rather than the ones that pop out of the machine when you crowbar it. Turn both freezers on and set the temperature to 43.15 Kelvin. Take your fourth and last Oxygen canister, wrench it to the right side of the gas filter, take one of the blue [[Portable Pump]]s and wrench it to the other side and turn the filter on without actually filtering anything. [[File:Toxins guide air alarm.jpg|150px|thumb|What the air alarm in the above setup should look like so you actually get some Tritium.]]
+
Before you do anything else in the Toxins Lab, you should go grab a emergency fire locker. You're going to have to enter the mix chamber itself which starts as a vacuum; the fire suit and helmet will protect you against the low pressure. Don the firesuit, fire helmet, and oxygen tank/mask, and cycle the [[airlock|airlocks]] until you are inside. At the bare minimum, you need to add one scrubber on a different layer (I usually use layer 2 with brown pipes), as well as pipes running inside the airlock with a canister port at the end in between the interior and exterior doors. Optionally you can hook up more scrubbers to the outtake pipe. More scrubbers increases the amount of tritium you can collect before it burns up into water vapor and C02. Once you are satisfied, exit the mix chamber and cycle back to the interior door. Change out of the firefighting gear, you will not be needing it anymore (unless of course you start a fire).
  
At this point, you should have three full Oxygen canisters worth in the heating chamber. Go into the airlock, set the pressure pump to 50 kPA and set the [[Air Alarm]] next to the Freezer to Scrub, Extended, Tritium (for all scrubbers in the room, if you added more). Grab a Plasma canister, wrench it to the input connector and as soon as you see purple gas going into the mix chamber, ignite it. After a few moments the fire should become blue and you'll start creating Tritium, which will automatically be scrubbed into your pipe network up to the volume pump '''(LEAVE THE PUMP OFF FOR NOW)'''. The freezer will work hard to cool it down while the scrubber keeps putting hot Tritium in the pipes.  
+
Go inside the [[airlock]] and set the input gas pump to 4500 kPa and re-pipe the output piping at the top. After you max out the input pump, you can start wrenching Oxygen canisters to the input connector, open the valve and just let the oxygen flood into the mix chamber while you work. You'll want to replace the outtake valve with a pump (pressure or volume both work, but volume has a higher throughput and is generally used in custom pipings). Replace the pressure pump you start with with a straight pipe. Regularly keep checking the Oxygen Canister to see if it's empty and replace it if it is until you have three total in. At some point you're also going to want to print some [[plasteel]] and build a tier 2 [[Atmospherics_items#Canister|canister]]; you can easily get plasteel from the science [[protolathe]] by searching for the "Iron + Plasma" selection, assuming the [[Shaft Miner|Shaft Miners]] have brought some sweet sweet plasma in. Once that is made, go ahead and wrench it into the extra port you added in between the mix chamber airlocks.
  
Return to the Portable Pump you left above to be filled with Oxygen and wrench it to the free Freezer. Leave it like that, take a  [[Portable Pump]] and wrench it to the Output of the heating chamber but '''KEEP THE VOLUME PUMP TURNED OFF.'''
+
=== Thermomachine Setup ===
The Oxygen is now cooling, your Tritium is being created. Keep [[Analyzer|analyzing]] the pipes with the Tritium in it. Soon, you should stop getting new Tritium (the 'mol' value will stop going up) and the temperature should approach our target 43.15. Anything below 45 is fine. Then, and only then, turn the Volume Pump on and put all the Tritium in the [[Portable Pump]].
+
  
Keep analyzing the pipe to the left of the Volume Pump and when it's empty, unwrench the Pump and move it away. Turn the [[Freezer]] off, turn the Volume Pump off and unwrench it, then re-wrench it. Doing so will make any leftover gases in the pump vanish and clean it, as it's impossible to completely empty it out normally. The mix chamber should still be burning at this point -- if not, you either wasted too much time or made a mistake somewhere. Go to the [[Air Alarm]] and change it from scrubbing Tritium to scrubbing Plasma. Wrench the tier 2 [[Atmospherics_items#Canister|canister]] and wait a bit, keep analyzing the pipes. The Plasma in the pipes should reach a temperature of at least 8000 Kelvin and will probably go higher. When it stops getting hotter, turn the Volume Pump on and fill your canister with the hot Plasma. If you have small trace amounts of Tritium in the plasma pump, don't worry about it.
+
To reach our target temperature of about 43.15 Kelvin, we're going to need to upgrade our [[Freezer|Thermomachines]] with [[High-Power_Micro-Laser|Tier 2 Lasers]], which should by now be available from the Science Protolathe in [[Research and Development]]. If not, consider liberal application of a Toolbox to your fellow scientists heads, and/or research Industrial Engineering yourself and print 4 of them. You can also use a Rapid Part Exchange Device (RPED) to install them quicker.
  
That's it! If you did it right you got all the gases you need now, and the hard part is over. Now comes the fun part - actually building the bomb and blowing it up.
+
Next, head back to your den and the unsecure one of the [[Freezer|Thermomachines]] (screwdriver to open the panel, then right click with a wrench), and position it so it connects to your output pipes just below the pump you installed. Upgrade this Thermomachine either by using a RPED or by dismantling and rebuilding it with the new lasers. Upgrade the other Thermomachine, too. In both cases, use your new lasers rather than the ones that pop out of the machine when you crowbar it. Turn both Thermomachines to 'Cooling' and set the temperature to 43.15 Kelvin, then turn them on.  
  
=Sealing the Deal - Putting Together a Bomb=
+
Since Thermomachines on Cooling mode are basically deluxe heat transfer pumps, you need to connect the output (red) end of the machine to something to dump the heat from the hot tritium coming out of the mix chamber elsewhere. Thankfully, it's easy to connect the machine's output to the station's red waste pipe loop. Set your pipe color to red and place a Layer Adapter next to the Thermomachine's output (the one you are using to cool the mix chamber output pipe). Either use a [[T-Ray Scanner]] or rip up some floor tiles to locate the station's red waste loop in the lab, and place more red pipes on layer 2 until you get a connection.
[[File:Explosivebombthatgoesboom.png‎|thumb|64px|OH MY GOD JC A BOMB!]]
+
If everything went right, you should have two [[Portable Pump]]s and a [[Atmospherics_items#Canister|tier 2 canister]]. One pump filled with about 43.15 Kelvin Oxygen, one with about 43.15 Kelvin Tritium and a canister with hot (~8000+ Kelvin) Plasma.
+
  
Head to the [[Tank Storage Unit]], grab a [[Plasma Tank]] and an [[Oxygen Tank]], load them into the white [[Portable Scrubber]] on the right and empty your tanks completely of Plasma and Oxygen, respectively. Put one of the empty tanks in the Tritium Pump, set the target pressure to 850 kPa, set direction to ''in'' and open the valve. Wait for the tank to fill, close the valve, take the Tritium tank to the Oxygen pump and fill it up until it's full by setting the direction to '''in''' and turning the pump on at 2533 kPa pressure. Take the other tank and fill it in its entirety with Plasma. Attach both tanks to a [[Tank Transfer Valve]], pick up a signaler, change the signal code, screwdriver it and attach it to the Tank Transfer Valve. Place the TTV on the mass driver in the room to the right, shoot it to the bomb site and when it's there send the signal using your PDA or another signaler.
+
''Note: Sometimes the Thermomachines fail to properly cool down to the desired temperature. If you find you can't the tritium to cool down enough, you may have to research Tier 3 Lasers to reach 43.15k. These will require two extra technologies and cost some uranium, so you better hope the shaft miners decided to [[Byond the impossible|come back alive with some]] before running off to become a Monster Hunter.''
  
If you did everything right, the screen should shake and the machine should inform you about your success and the 50.000 research points you earned! If you want, you can turn the Intercom next to the machine on before detonating your bomb to broadcast the test results on the common radio. That will (sometimes) stop the crew from asking what the hell just happened.
+
Now for the last bit of prep. The blue [[Portable Pump]]s found in [[Toxins Storage]] can cram more gas into the gas tanks we use for the bomb just like the T2 canister; lets use it for our super cooled oxygen. Take your fourth and last Oxygen canister, wrench it to the right side of the gas filter setup in the room, take one of the Portable Pumps and wrench it to the other side and turn the filter on without actually filtering anything. Once done, all of the oxygen should have moved from the canister into the portable pump. Unwrench the pump and bring it over to the second Thermomachine. Wrench it into the directly adjacent connector port, and ensure the Thermomachine is on and set to 'Cooling' at 43.15 k. The portable pump is now filled with chilled oxygen ready for our bomb mix. [[File:Toxins guide air alarm.jpg|250px|thumb|Properly configured Scrubbers set to EXPANDED and TRITIUM.]]
  
 +
=== Ignition and Tritium Production ===
  
=Principles=
+
At this point, you should have three full canisters worth of Oxygen in the Toxins Mix Chamber, and your setup should look something like the image on the right. If you've made it this far without any issue, great work!
 +
We have the cooled oxygen, now we just need the chilled tritium and the super heated plasma. Let's get onto the dangerous stuff now.
 +
 
 +
Start by going into the airlock and set the input pressure pump to 50 kPA. This sets a slow rate of input to trickle in plasma as fuel for the soon to be roaring fire.
 +
 
 +
Next, we need to program the scrubbers to actually scrub out the tritium we want, while leaving the waste gases we don't want behind. Open the interface of the Toxins Mix Chamber [[Air Alarm]] next to the interior airlock by left clicking on it.  Select 'Scrubbers' to display a list of all scrubbers in the mix chamber. For each one, set the range to 'Extended' and scrub for 'Tritium', and turn them ON if they aren't already. As for the scrubber we added to collect plasma, set that to scrub for 'Plasma' instead, '''but don't turn it on yet. We will turn the plasma scrubber on during the burn once the fire gets hot enough!'''
 +
 
 +
After your scrubbers are programed, go grab a Plasma canister from storage. Wrench it to the input connector and as soon as you see purple gas going into the mix chamber, activate the mix chamber igniter using the small button near the mix chamber Air Alarm (check the name of it first by examining it, you don't want to accidentally open the chamber vent blast doors). After a few moments the fire should become blue and you'll start creating Tritium, which will automatically be scrubbed into your pipe network up to the volume pump '''(LEAVE THE PUMP OFF FOR NOW)'''. The freezer will work hard to cool it down while the scrubber keeps putting hot Tritium in the pipes.
 +
 
 +
Now that the tritium is being created, what about the plasma we need? Go find the mix chamber console somewhere in the room. The console will give you the temperature of the chamber, pressure of the chamber, and list of all the gases in the chamber as well as their percentage. Watch this carefully until the temperature reaches about 15,000 kelvin. Once it does, go ahead and turn on the plasma scrubber from the Air Alarm we set up earlier. If you check your T2 canister you have wrenched inside the airlock, you should see that it's now being filled with pipping hot plasma. Watch it and let it siphon plasma until the canister reaches a pressure of over 3200kPa, then shut off the plasma scrubber.
 +
 
 +
Now back to the tritium. Take a second blue [[Portable Pump]] and wrench it to the Output of the heating chamber but '''KEEP THE VOLUME PUMP TURNED OFF.'''
 +
Keep [[Analyzer|analyzing]] the pipes with the Tritium in it. Soon, you should stop getting new Tritium (the 'mol' value will stop going up) and the temperature should approach our target 43.15. Anything below 45 is fine. Then, and only then, turn the Volume Pump on to put all the Tritium in the [[Portable Pump]]. Once the Portable Pump is filled and the output pipes are empty, unwrench the Portable Pump.
 +
 
 +
If you want to clean out the output pipes for future reuse, here's how. Turn the Volume Pump off and unwrench it, then re-wrench it. Doing so will make any leftover gases in the pump vanish and clean it, as it's impossible to completely empty it out normally. Turn the [[Thermomachine|Freezer]] off and rebuild it entirely too to clear it's gas storage. If you have small trace amounts of Tritium in the pipes, don't worry about it too much. At super small mol counts it doesn't affect much at all.
 +
 
 +
'''That's it! If you did it right you got all the gases you need now, and the hard part is over. Now comes the fun part - actually building the bomb and blowing it up.'''
 +
 
 +
==[[File:Explosivebombthatgoesboom.png]] Sealing the Deal - Putting Together a Research Bomb==
 +
[[File:Explosivebombthatgoesboom.png‎|thumb|128px|OH MY GOD JC A BOMB!]]
 +
If everything went right, you should have two [[Portable Pump]]s and a [[Atmospherics_items#Canister|tier 2 canister]]. One pump filled with about 43.15 Kelvin Oxygen, one with about 43.15 Kelvin Tritium and a T2 canister with hot (~8000+ Kelvin) Plasma. Lets put this bad boy together.
 +
 
 +
Head to the [[Tank Storage Unit]], grab a [[Plasma Tank]] and an [[Oxygen Tank]], and load them into one of the white [[Portable Scrubber]]s and empty your tanks completely of Plasma and Oxygen, respectively. Put the empty blue tank in the Tritium Pump, set the target pressure to 850 kPa, set direction to ''In'' and turn on the pump. Wait for the tank to fill, then turn off the pump. Take the tank you just filled to the Oxygen pump and fill it up until it's full by setting the direction to '''In''' and turning the pump on at 2533 kPa pressure. Take the other empty orange tank and fill it in its entirety with Plasma from the T2 canister.
 +
 
 +
Your gas tanks are now ready. Now you just need to put them together along with a signaler. Attach both tanks to a [[Tank Transfer Valve]] (they look like manual values). Pick up a signaler and change the signal code to whatever you want. Use a screwdriver on the signaler to change it to attachment mode and attach it to the Tank Transfer Valve. Head over to the launch site and place the TTV on the mass driver in the room to the right, shoot it to the bomb site and when it's there send the same signal code using your PDA or another signaler.
 +
 
 +
If you did everything right, the entire station should violently rock and a machine should inform you about your success, along with any experiments you completed and the 50,000 credits you earned! If you want, you can turn the Intercom next to the machine on before detonating your bomb to broadcast the test results on the common radio. That will (sometimes) stop the crew from asking what the hell just happened.
 +
 
 +
 
 +
'''Watch [https://www.youtube.com/watch?v=pWtBTXREN8E this somewhat outdated video] for a concise but out of date guide to toxins. The video isn't up to date with the latest /tg/ features such as the changes to Thermomachines and smart pipes.'''
 +
 
 +
 
 +
=[[File:Clipboard paper.png]] Principles=
  
 
or, "How it Actually Works", or, "Read if You're a Nerd".
 
or, "How it Actually Works", or, "Read if You're a Nerd".
Line 51: Line 81:
 
As a bonus, hot plasma and oxygen burn, which raises the pressure that extra bit.
 
As a bonus, hot plasma and oxygen burn, which raises the pressure that extra bit.
  
Even though the maxcap for explosions can be safely hit with these bombs, the Tachyon-Doppler Array reads the blast size that the bomb ''would have, were there no maxcap at all''. This is called the "theoretical" radius. For this reason, even if they don't explode any more violently, tritium based research bombs get a way higher score on the array.  
+
Even though the max capacity for explosions can be safely hit with these bombs, the Tachyon-Doppler Array reads the blast size that the bomb ''would have, were there no maxcap at all''. This is called the "theoretical" radius. For this reason, even if they don't explode any more violently, tritium based research bombs get a way higher score on the array.  
  
 
The tritium is placed in the oxygen tank, as it has a heat capacity even smaller than oxygen's (half of it to be precise). It is kept at roughly a ratio of 66% oxygen to 33% tritium, which is the optimal ratio for it and hydrogen. Once the plasma feeds the energy into the cold tank, the violent tritium burn raises the pressure considerably, producing a much larger theoretical boom.
 
The tritium is placed in the oxygen tank, as it has a heat capacity even smaller than oxygen's (half of it to be precise). It is kept at roughly a ratio of 66% oxygen to 33% tritium, which is the optimal ratio for it and hydrogen. Once the plasma feeds the energy into the cold tank, the violent tritium burn raises the pressure considerably, producing a much larger theoretical boom.
Line 57: Line 87:
 
You might be asking: how far can we go with this? Well, if for some ungodly reason you're playing on a server with the maxcap disabled in the config (or, much more likely, if you disabled it yourself on a local build), you can make some pretty large bombs. The largest one has hot hyper-noblium in the hot tank (10 times larger heat capacity than plasma, the highest of all) and a very densely packed oxygenated tritium payload in the cold tank. Unfortunately, hyper-noblium stops all reactions such as combustion, but on very high temperatures the mole count should be negligible.
 
You might be asking: how far can we go with this? Well, if for some ungodly reason you're playing on a server with the maxcap disabled in the config (or, much more likely, if you disabled it yourself on a local build), you can make some pretty large bombs. The largest one has hot hyper-noblium in the hot tank (10 times larger heat capacity than plasma, the highest of all) and a very densely packed oxygenated tritium payload in the cold tank. Unfortunately, hyper-noblium stops all reactions such as combustion, but on very high temperatures the mole count should be negligible.
  
If you try this out, you will begin to understand why the maxcap exists.
+
If you try this out, you will begin to understand why the maxcap exists. This is the true legacy of Cuban Pete.
  
=Implosion Compressor=
+
=[[File:Implosion compressor.gif]] Implosion Compressor and Anomaly Refining=
 
That funny-looking box in the toxins launch room does more than just sit around. It's the main way of getting [[Anomalies|anomaly cores]].
 
That funny-looking box in the toxins launch room does more than just sit around. It's the main way of getting [[Anomalies|anomaly cores]].
  
  
 
'''What's an anomaly core?'''
 
'''What's an anomaly core?'''
 +
 +
[[File:Flux core.gif]] [[File:Grav core.gif]] [[File:Anomaly core.gif]] [[File:Pyro core.gif]] [[File:Vortex core.gif]]
  
 
Anomaly cores are essentially an item with the special property of being able to exist only in a very small number (currently eight) per type. They're used to give functionality to several high-end research items, and can be obtained in one of two ways:
 
Anomaly cores are essentially an item with the special property of being able to exist only in a very small number (currently eight) per type. They're used to give functionality to several high-end research items, and can be obtained in one of two ways:
Line 69: Line 101:
 
*Defusing [[Anomalies]] with an analyzer and signaller, or with an [[Anomaly Neutralizer]]
 
*Defusing [[Anomalies]] with an analyzer and signaller, or with an [[Anomaly Neutralizer]]
  
*Buying raw cores from [[Cargo]] or using the 5 random ones toxins spawns with, and activating them in the Implosion Compressor.
+
*Buying raw cores from [[Cargo]] or using the random ones toxins spawns with, and activating them in the Implosion Compressor.
  
  
The machine will always require bombs with a blast radius of at least 4, which is tiny compared to the 50000 point research bomb, and only requires a bomb just short of the one described in [[#Guide to Maximum Capacity Bombing|the next paragraph]].
+
The machine will always require bombs with a blast radius of at least 4, which is tiny compared to the 50,000 point research bomb, and only requires a bomb just short of the one described in [[#Guide to Maximum Capacity Bombing|the next paragraph]]. However, with diminishing returns being a thing, this means that after processing multiple cores of the same type, the required blast radius will go up. You may need to slightly adjust your mix to be more powerful after each use of the Compressor.
  
The compressor will first take the raw core, then eat a TTV with two tanks attached. If the mixture of the two tanks would have provoked a blast that fulfills its requirements, the TTV will magically disappear and the raw core will be spit out as a proper, activated core. It's that easy!
+
The compressor will first take the raw core, then accept a TTV with two tanks attached. If the mixture of the two tanks would have provoked a blast that fulfills its requirements, the Implosion Compressor will rock the station with an equivalent effect of the actual blast, and the raw core will be spit out as a proper, activated core. You'll also get your TTV back, likely with one of the tanks gone. It's that easy!
  
 
=Guide to Maximum Capacity Bombing=
 
=Guide to Maximum Capacity Bombing=
  
So fate has decided to make you a [[Traitor|bad guy]] and you've decided to use your newfound knowledge in the art of bombing to tear the station a new one. Great! If you've followed the above instructions at least once, however, you'll probably have realised that you only have enough gas mix to make a single bomb. There are, however, six Tank Transfer Valves in your table (and you can even get more from Cargo). Surely this is no coincidence? Indeed it isn't.
+
So fate has decided to make you a [[Traitor|bad guy]] and you've decided to use your newfound knowledge in the art of bombing to tear the station a new one. Great! If you've followed the above instructions at least once, however, you'll probably have realized that you only have enough gas mix to make a single bomb. There are, however, six Tank Transfer Valves in your table (and you can even get more from Cargo). Surely this is no coincidence? Indeed it isn't.
A simple regular old Plasma-Oxygen bomb is very easy to set up and mass produce and, while awful and a waste of time in terms of research points, will be devastating if detonated strategically on the station! This part of the guide will assume you have some familiarity with working in Toxins and just highlight the bomb mix, as well as some general tips when bombing.
+
A simple regular old Plasma-Oxygen bomb is very easy to set up and mass produce and, while awful and a waste of time in terms of gaining department budget credits, will be devastating if detonated strategically on the station! This part of the guide will assume you have some familiarity with working in Toxins and just highlight the bomb mix, as well as some general tips when bombing.
  
 
Your bomb mix:
 
Your bomb mix:
Put cold Oxygen in a portable pump, and hot Plasma in a tier 2 [[Atmospherics_items#Canister|canister]]. Make sure to clean your piping inbetween to avoid contamination. Set the Freezer you start with to 141.3 Kelvin and cool Oxygen to that temperature. Upgrade your Heater with [[Quad-Ultra Micro-Laser|Tier 4 Lasers]] and set it to 1413 Kelvin and heat Plasma to that temperature. Grab two tanks from the Tank Dispenser, scrub them clean, fill one to 2533kPa with Oxygen and the other to 3039kPa with hot Plasma. All done, you got yourself a maxcap! Pick a trigger, put it somewhere and detonate it.
+
Put cold Oxygen in a portable pump, and hot Plasma in a tier 2 [[Atmospherics_items#Canister|canister]]. Make sure to clean your piping in-between to avoid contamination. Set the Freezer you start with to 141.3 Kelvin and cool Oxygen to that temperature. Upgrade your Heater with [[Quad-Ultra Micro-Laser|Tier 4 Lasers]] and set it to 1413 Kelvin and heat Plasma to that temperature. Grab two tanks from the Tank Dispenser, scrub them clean, fill one to 2533kPa with Oxygen and the other to 3039kPa with hot Plasma. All done, you got yourself a maxcap! Pick a trigger, put it somewhere and detonate it.
 
Below, you'll find the available triggers:
 
Below, you'll find the available triggers:
  
Line 127: Line 159:
 
  |image = Health_sensor.png
 
  |image = Health_sensor.png
 
}}
 
}}
 +
  
 
===Important Note about Remote Signaling Devices===
 
===Important Note about Remote Signaling Devices===
Some jokers like to randomly signal the default frequencies of these devices so before you attach one to a bomb you'll want to open its control panel by clicking it in your hand and change the frequency and code so that you don't get a nasty surprise.
+
Some jokers like to randomly signal the default frequencies of these devices so before you attach one to a bomb you'll want to open its control panel by using it in your hand and change the frequency and/or code so that you don't get a nasty surprise.
  
 
=Final Warning=
 
=Final Warning=
Seriously, don't go and randomly set these off on the station if you aren't a syndicate or otherwise an antagonistic character, you WILL get job-banned or permabanned.
+
'''Seriously, don't go and randomly set these off on the station if you aren't a syndicate or otherwise an antagonistic character, you WILL get job-banned or even permabanned.'''
  
=Don't be this guy=
+
If you manage to accidentally blow up toxins and maybe even the surrounding Research department once or twice as a beginner, don't panic and just explain what happened to the admins who will likely contact you. They're usually an understanding bunch and know that mistakes happen. ''Just make sure to learn from them!''
 +
 
 +
On the other hand, if you DO know what you're doing, the potential damage you can cause to the station can be extreme and sometimes irreversible, very likely changing the course of the round. There are VERY few instances where you can use these bombs as a weapon while being a normal non-antagonist crew member, and even when faced with [[Blood Cult|a situation where it could be used to save the station]], use it only as a last resort.
 +
 
 +
 
 +
==Don't Be This Guy==
 +
We call this one a Toxins Moment.
 
[[File:Failed.png|thumb|left|288px|Well, shit.]]
 
[[File:Failed.png|thumb|left|288px|Well, shit.]]
 +
 +
Hey, at least you'll keep the [[Atmospheric Technician]]s busy for a bit.
  
  
  
 
[[Category:Guides]]
 
[[Category:Guides]]

Revision as of 21:35, 15 May 2021

Toxins is a section of the Research and Development section of the station. There was a time when being in this place was basically a dead giveaway that you were a bad guy but with the advent of Research bombs, this is no longer the case.* Instead, being a robust bomb-maker will get you praise and laudation as the crew realizes you used all the bombmix to complete difficult research experiments and get up to 50,000 Research Budget credits rather than using it to turn the Station into a crater-ridden deathtrap! Hooray Science!

*Make note that past the first research bomb the remaining bomb mix's only applications are for refining raw anomaly cores via the Implosion Compressor, or for more nefarious purposes (or very inefficient but fun lavaland mining).

Toxins
Toxins is located within the Research Division and is the home of bomb construction with the lab on the left, a passageway in the middle and the observation room on the right.

Canister.png Acquiring A Research Bomb Mix

Latest Revision by PotatoMasher. Send any questions or comments my way.

The primary goal of Toxins is to create a gas mixture that when combined will cause a massive explosion, large enough for the mixture formula to complete required experiments for research (as well as being valuable enough to sell off for profit, because we here at SS13 LOVE money). A number of technologies involving weaponry and explosives require completed Toxins Experiments to be able to research them. You can also earn a max amount of 50,000 credits towards the Research Department's budget, allowing the Research Director to purchase plenty of goods and extra raw anomaly cores from cargo.

This section covers a single method to obtain a "50k" Research Bomb, which should grant that sweet sweet credit boost towards the budget as well as complete every required toxins experiment. There's more than one way to go about making a bomb though, so feel free to experiment if you're confident enough you won't blow up the entire department.

Introduction

A regular bomb consists of two tanks attached to a tank transfer valve. For a finished research bomb, one of those tanks will be filled with a mix of supercooled Oxygen and Tritium (33% Tritium and 66% Oxygen at about 43K temperature), providing the boom, and another tank filled with superheated Plasma (8000-32000K temperature), providing the energy.

Tritium happens when Plasma is burnt in a very Oxygen-rich environment, generally about 3%-97%. In total, we'll burn in the Toxins lab's heating chamber three of the four Oxygen canisters that we start with and then slowly trickle in Plasma and ignite it. Hot gases take up a lot of place, so we're going to want to cool the Tritium right after creating it to reduce its volume and help us store as much as possible. (Also if you don't the containers will probably melt and you'll be this guy.) All the tools you need for that are in this room: Wrench, Screwdriver, Crowbar, Analyzer and RPD. When piping with the RPD, remember to avoid using grey pipes when possible, as they auto connect with every single other colored pipe. Plus, color coding helps with visual clarity and organization.
Your setup should look similar to this when you are done setting up, varying by map of course.

Initial Piping

For this set up, we are going to add an extra scrubber and canister port to extract the super hot plasma needed while the mix is burning.

Before you do anything else in the Toxins Lab, you should go grab a emergency fire locker. You're going to have to enter the mix chamber itself which starts as a vacuum; the fire suit and helmet will protect you against the low pressure. Don the firesuit, fire helmet, and oxygen tank/mask, and cycle the airlocks until you are inside. At the bare minimum, you need to add one scrubber on a different layer (I usually use layer 2 with brown pipes), as well as pipes running inside the airlock with a canister port at the end in between the interior and exterior doors. Optionally you can hook up more scrubbers to the outtake pipe. More scrubbers increases the amount of tritium you can collect before it burns up into water vapor and C02. Once you are satisfied, exit the mix chamber and cycle back to the interior door. Change out of the firefighting gear, you will not be needing it anymore (unless of course you start a fire).

Go inside the airlock and set the input gas pump to 4500 kPa and re-pipe the output piping at the top. After you max out the input pump, you can start wrenching Oxygen canisters to the input connector, open the valve and just let the oxygen flood into the mix chamber while you work. You'll want to replace the outtake valve with a pump (pressure or volume both work, but volume has a higher throughput and is generally used in custom pipings). Replace the pressure pump you start with with a straight pipe. Regularly keep checking the Oxygen Canister to see if it's empty and replace it if it is until you have three total in. At some point you're also going to want to print some plasteel and build a tier 2 canister; you can easily get plasteel from the science protolathe by searching for the "Iron + Plasma" selection, assuming the Shaft Miners have brought some sweet sweet plasma in. Once that is made, go ahead and wrench it into the extra port you added in between the mix chamber airlocks.

Thermomachine Setup

To reach our target temperature of about 43.15 Kelvin, we're going to need to upgrade our Thermomachines with Tier 2 Lasers, which should by now be available from the Science Protolathe in Research and Development. If not, consider liberal application of a Toolbox to your fellow scientists heads, and/or research Industrial Engineering yourself and print 4 of them. You can also use a Rapid Part Exchange Device (RPED) to install them quicker.

Next, head back to your den and the unsecure one of the Thermomachines (screwdriver to open the panel, then right click with a wrench), and position it so it connects to your output pipes just below the pump you installed. Upgrade this Thermomachine either by using a RPED or by dismantling and rebuilding it with the new lasers. Upgrade the other Thermomachine, too. In both cases, use your new lasers rather than the ones that pop out of the machine when you crowbar it. Turn both Thermomachines to 'Cooling' and set the temperature to 43.15 Kelvin, then turn them on.

Since Thermomachines on Cooling mode are basically deluxe heat transfer pumps, you need to connect the output (red) end of the machine to something to dump the heat from the hot tritium coming out of the mix chamber elsewhere. Thankfully, it's easy to connect the machine's output to the station's red waste pipe loop. Set your pipe color to red and place a Layer Adapter next to the Thermomachine's output (the one you are using to cool the mix chamber output pipe). Either use a T-Ray Scanner or rip up some floor tiles to locate the station's red waste loop in the lab, and place more red pipes on layer 2 until you get a connection.

Note: Sometimes the Thermomachines fail to properly cool down to the desired temperature. If you find you can't the tritium to cool down enough, you may have to research Tier 3 Lasers to reach 43.15k. These will require two extra technologies and cost some uranium, so you better hope the shaft miners decided to come back alive with some before running off to become a Monster Hunter.

Now for the last bit of prep. The blue Portable Pumps found in Toxins Storage can cram more gas into the gas tanks we use for the bomb just like the T2 canister; lets use it for our super cooled oxygen. Take your fourth and last Oxygen canister, wrench it to the right side of the gas filter setup in the room, take one of the Portable Pumps and wrench it to the other side and turn the filter on without actually filtering anything. Once done, all of the oxygen should have moved from the canister into the portable pump. Unwrench the pump and bring it over to the second Thermomachine. Wrench it into the directly adjacent connector port, and ensure the Thermomachine is on and set to 'Cooling' at 43.15 k. The portable pump is now filled with chilled oxygen ready for our bomb mix.
Properly configured Scrubbers set to EXPANDED and TRITIUM.

Ignition and Tritium Production

At this point, you should have three full canisters worth of Oxygen in the Toxins Mix Chamber, and your setup should look something like the image on the right. If you've made it this far without any issue, great work! We have the cooled oxygen, now we just need the chilled tritium and the super heated plasma. Let's get onto the dangerous stuff now.

Start by going into the airlock and set the input pressure pump to 50 kPA. This sets a slow rate of input to trickle in plasma as fuel for the soon to be roaring fire.

Next, we need to program the scrubbers to actually scrub out the tritium we want, while leaving the waste gases we don't want behind. Open the interface of the Toxins Mix Chamber Air Alarm next to the interior airlock by left clicking on it. Select 'Scrubbers' to display a list of all scrubbers in the mix chamber. For each one, set the range to 'Extended' and scrub for 'Tritium', and turn them ON if they aren't already. As for the scrubber we added to collect plasma, set that to scrub for 'Plasma' instead, but don't turn it on yet. We will turn the plasma scrubber on during the burn once the fire gets hot enough!

After your scrubbers are programed, go grab a Plasma canister from storage. Wrench it to the input connector and as soon as you see purple gas going into the mix chamber, activate the mix chamber igniter using the small button near the mix chamber Air Alarm (check the name of it first by examining it, you don't want to accidentally open the chamber vent blast doors). After a few moments the fire should become blue and you'll start creating Tritium, which will automatically be scrubbed into your pipe network up to the volume pump (LEAVE THE PUMP OFF FOR NOW). The freezer will work hard to cool it down while the scrubber keeps putting hot Tritium in the pipes.

Now that the tritium is being created, what about the plasma we need? Go find the mix chamber console somewhere in the room. The console will give you the temperature of the chamber, pressure of the chamber, and list of all the gases in the chamber as well as their percentage. Watch this carefully until the temperature reaches about 15,000 kelvin. Once it does, go ahead and turn on the plasma scrubber from the Air Alarm we set up earlier. If you check your T2 canister you have wrenched inside the airlock, you should see that it's now being filled with pipping hot plasma. Watch it and let it siphon plasma until the canister reaches a pressure of over 3200kPa, then shut off the plasma scrubber.

Now back to the tritium. Take a second blue Portable Pump and wrench it to the Output of the heating chamber but KEEP THE VOLUME PUMP TURNED OFF. Keep analyzing the pipes with the Tritium in it. Soon, you should stop getting new Tritium (the 'mol' value will stop going up) and the temperature should approach our target 43.15. Anything below 45 is fine. Then, and only then, turn the Volume Pump on to put all the Tritium in the Portable Pump. Once the Portable Pump is filled and the output pipes are empty, unwrench the Portable Pump.

If you want to clean out the output pipes for future reuse, here's how. Turn the Volume Pump off and unwrench it, then re-wrench it. Doing so will make any leftover gases in the pump vanish and clean it, as it's impossible to completely empty it out normally. Turn the Freezer off and rebuild it entirely too to clear it's gas storage. If you have small trace amounts of Tritium in the pipes, don't worry about it too much. At super small mol counts it doesn't affect much at all.

That's it! If you did it right you got all the gases you need now, and the hard part is over. Now comes the fun part - actually building the bomb and blowing it up.

Explosivebombthatgoesboom.png Sealing the Deal - Putting Together a Research Bomb

OH MY GOD JC A BOMB!

If everything went right, you should have two Portable Pumps and a tier 2 canister. One pump filled with about 43.15 Kelvin Oxygen, one with about 43.15 Kelvin Tritium and a T2 canister with hot (~8000+ Kelvin) Plasma. Lets put this bad boy together.

Head to the Tank Storage Unit, grab a Plasma Tank and an Oxygen Tank, and load them into one of the white Portable Scrubbers and empty your tanks completely of Plasma and Oxygen, respectively. Put the empty blue tank in the Tritium Pump, set the target pressure to 850 kPa, set direction to In and turn on the pump. Wait for the tank to fill, then turn off the pump. Take the tank you just filled to the Oxygen pump and fill it up until it's full by setting the direction to In and turning the pump on at 2533 kPa pressure. Take the other empty orange tank and fill it in its entirety with Plasma from the T2 canister.

Your gas tanks are now ready. Now you just need to put them together along with a signaler. Attach both tanks to a Tank Transfer Valve (they look like manual values). Pick up a signaler and change the signal code to whatever you want. Use a screwdriver on the signaler to change it to attachment mode and attach it to the Tank Transfer Valve. Head over to the launch site and place the TTV on the mass driver in the room to the right, shoot it to the bomb site and when it's there send the same signal code using your PDA or another signaler.

If you did everything right, the entire station should violently rock and a machine should inform you about your success, along with any experiments you completed and the 50,000 credits you earned! If you want, you can turn the Intercom next to the machine on before detonating your bomb to broadcast the test results on the common radio. That will (sometimes) stop the crew from asking what the hell just happened.


Watch this somewhat outdated video for a concise but out of date guide to toxins. The video isn't up to date with the latest /tg/ features such as the changes to Thermomachines and smart pipes.


Clipboard paper.png Principles

or, "How it Actually Works", or, "Read if You're a Nerd".

A TTV does not explode on its own: it only connects two tanks, and produces an explosion based on the same formula tanks themselves use for overpressure.

The explosion of a TTV depends entirely on how quickly the pressure rises in the tanks. By this principle, the most effective way to make a TTV is to have as much gas as possible in one tank, and as much energy as possible in the other. This is why we make oxygen/plasma bombs: in one tank, you get the enormous heat capacity of plasma combined with enormous heat - in the other, you try to fit as much oxygen as possible in the tank, and this is most effectively done via cooling. Since the gas needs to change in pressure very fast and very much, we use a gas with a low heat capacity (oxygen's is 10 times lower than plasma's). As a bonus, hot plasma and oxygen burn, which raises the pressure that extra bit.

Even though the max capacity for explosions can be safely hit with these bombs, the Tachyon-Doppler Array reads the blast size that the bomb would have, were there no maxcap at all. This is called the "theoretical" radius. For this reason, even if they don't explode any more violently, tritium based research bombs get a way higher score on the array.

The tritium is placed in the oxygen tank, as it has a heat capacity even smaller than oxygen's (half of it to be precise). It is kept at roughly a ratio of 66% oxygen to 33% tritium, which is the optimal ratio for it and hydrogen. Once the plasma feeds the energy into the cold tank, the violent tritium burn raises the pressure considerably, producing a much larger theoretical boom.

You might be asking: how far can we go with this? Well, if for some ungodly reason you're playing on a server with the maxcap disabled in the config (or, much more likely, if you disabled it yourself on a local build), you can make some pretty large bombs. The largest one has hot hyper-noblium in the hot tank (10 times larger heat capacity than plasma, the highest of all) and a very densely packed oxygenated tritium payload in the cold tank. Unfortunately, hyper-noblium stops all reactions such as combustion, but on very high temperatures the mole count should be negligible.

If you try this out, you will begin to understand why the maxcap exists. This is the true legacy of Cuban Pete.

Implosion compressor.gif Implosion Compressor and Anomaly Refining

That funny-looking box in the toxins launch room does more than just sit around. It's the main way of getting anomaly cores.


What's an anomaly core?

Flux core.gif Grav core.gif Anomaly core.gif Pyro core.gif Vortex core.gif

Anomaly cores are essentially an item with the special property of being able to exist only in a very small number (currently eight) per type. They're used to give functionality to several high-end research items, and can be obtained in one of two ways:

  • Buying raw cores from Cargo or using the random ones toxins spawns with, and activating them in the Implosion Compressor.


The machine will always require bombs with a blast radius of at least 4, which is tiny compared to the 50,000 point research bomb, and only requires a bomb just short of the one described in the next paragraph. However, with diminishing returns being a thing, this means that after processing multiple cores of the same type, the required blast radius will go up. You may need to slightly adjust your mix to be more powerful after each use of the Compressor.

The compressor will first take the raw core, then accept a TTV with two tanks attached. If the mixture of the two tanks would have provoked a blast that fulfills its requirements, the Implosion Compressor will rock the station with an equivalent effect of the actual blast, and the raw core will be spit out as a proper, activated core. You'll also get your TTV back, likely with one of the tanks gone. It's that easy!

Guide to Maximum Capacity Bombing

So fate has decided to make you a bad guy and you've decided to use your newfound knowledge in the art of bombing to tear the station a new one. Great! If you've followed the above instructions at least once, however, you'll probably have realized that you only have enough gas mix to make a single bomb. There are, however, six Tank Transfer Valves in your table (and you can even get more from Cargo). Surely this is no coincidence? Indeed it isn't. A simple regular old Plasma-Oxygen bomb is very easy to set up and mass produce and, while awful and a waste of time in terms of gaining department budget credits, will be devastating if detonated strategically on the station! This part of the guide will assume you have some familiarity with working in Toxins and just highlight the bomb mix, as well as some general tips when bombing.

Your bomb mix: Put cold Oxygen in a portable pump, and hot Plasma in a tier 2 canister. Make sure to clean your piping in-between to avoid contamination. Set the Freezer you start with to 141.3 Kelvin and cool Oxygen to that temperature. Upgrade your Heater with Tier 4 Lasers and set it to 1413 Kelvin and heat Plasma to that temperature. Grab two tanks from the Tank Dispenser, scrub them clean, fill one to 2533kPa with Oxygen and the other to 3039kPa with hot Plasma. All done, you got yourself a maxcap! Pick a trigger, put it somewhere and detonate it. Below, you'll find the available triggers:

Timer
Timer
Proximity Sensor
Proximity Sensor
Remote Signaling Device
Remote Signaling Device
Voice Analyzer
Voice Analyzer
Infrared Emitter
Infrared Emitter
Mousetrap
Mousetrap
Health Sensor
Health Sensor


Important Note about Remote Signaling Devices

Some jokers like to randomly signal the default frequencies of these devices so before you attach one to a bomb you'll want to open its control panel by using it in your hand and change the frequency and/or code so that you don't get a nasty surprise.

Final Warning

Seriously, don't go and randomly set these off on the station if you aren't a syndicate or otherwise an antagonistic character, you WILL get job-banned or even permabanned.

If you manage to accidentally blow up toxins and maybe even the surrounding Research department once or twice as a beginner, don't panic and just explain what happened to the admins who will likely contact you. They're usually an understanding bunch and know that mistakes happen. Just make sure to learn from them!

On the other hand, if you DO know what you're doing, the potential damage you can cause to the station can be extreme and sometimes irreversible, very likely changing the course of the round. There are VERY few instances where you can use these bombs as a weapon while being a normal non-antagonist crew member, and even when faced with a situation where it could be used to save the station, use it only as a last resort.


Don't Be This Guy

We call this one a Toxins Moment.

Well, shit.

Hey, at least you'll keep the Atmospheric Technicians busy for a bit.